Keeping These Points in Mind Will Teach You How to Pick a High Visibility Raincoat!

High Visibility Raincoat is a kind of protective clothing which is made by adding reflective material on the regular raincoat, which can make the raincoat reflect the light after receiving the light irradiation. Wearing this kind of clothes, can be very eye-catching in rainy days, in order to prompt the front and rear vehicles their position, so as to protect themselves and reduce the possibility of traffic accidents.

Therefore, reflective raincoat is used for duty, sanitation and cycling enthusiasts equipment, choose a good raincoat is also very important.

Next, Staneex will take you in-depth understanding of the better selection of reflective raincoat:

1. Types of high visibility raincoat

From the style point of view, reflective raincoat generally have one-piece, split two kinds.

One-piece raincoat is generally a knee-length coat, waterproof better; while the split raincoat is a common raincoat rain trousers, simple to wear and take off, easy to move.

2. Reflective Raincoat Material

Raincoat to polyester synthetic fibre-based, slightly rough Oxford cloth, there are also base materials synthetic composite fabric. A PU or PVC waterproof layer is applied to the inner layer of the fabric, which is the most commonly used raincoat fabric.

This fabric is more cost-effective, waterproof, wearable and durable, the waterproof layer also has a fine breathable holes, more comfortable to wear.

How to choose a high-quality raincoat?

1). Comfort and breathability of the base material

High-quality raincoat is soft to the touch, and will not feel hot and stuffy when worn for a long time, not to mention the situation of "heavy rain outside and light rain inside".

2). Condition of reflective strips

Reflective strip testing requires professional equipment, you can usually try it on at night, shine the raincoat at a certain distance to observe the performance of reflective strips. Generally speaking, manufacturers will carry out formal testing of the raincoat, which is nothing to worry about.

3). Width of reflective strips

Reflective strips need to have a reflective interval of 330 metres and above, so the width of reflective strips should ideally be no less than 5cm. If you can't reach this width, it will be difficult to reach this reflective interval, and the safety coefficient is relatively reduced.