How to Choose the Size of Labour Insurance Shoes? What Material is Better for the Sole?

First, how to choose the size of labour insurance shoes

1, Safety Shoes are different from the general size of casual shoes, in the selection of the need to measure the size of your feet fine, the following method can be measured.

Physical Measurement Methods: Measurement must be taken in the correct posture: stand with legs parallel (do not sit, squat): weight is divided evenly on both feet. Then measure, put the feet flat on a piece of white paper, step hard on the ground, use a pen to point out the left and right widest width point, and then use the front and back 2 points to point out the front and back of the longest point. Finally the front and back 2 points and the left and right 2 points are connected as correct.

Foot length and width. (Note: Both feet should be measured, and take the maximum value)

2, the front tip of the safety shoes to leave a certain amount of margin, especially anti-smash safety shoes, because of its hard steel head, wear, pay attention to the toe of the shoes to have enough margin. Normally, if you stand for a long time, then the toes should have more room for movement, otherwise, the toes will be in a state of extrusion for a long time, which will cause great harm over time! There are a lot of people in the choice of safety shoes feel the same shoe size safety shoes than usually wear fashion shoes to be larger, this is the safety shoes in the production in accordance with national requirements to increase the size of the shoes we usually wear how big size, buy more big size of the safety shoes can be.

3, safety shoes of different varieties, its fat and thin requirements are not the same. The fatness of the foot is expressed by the width of the palm and the length of the metatarsal toe circumference, and the fatness of the shoe is determined by the size of the internal space of the shoe cavity, which relies on the length of the metatarsal toe circumference of the shoe lasts and the width of the lasts, and is generally determined by the manufacturer's choice. Consumers can only choose according to the effect of trying on.

4. The heel of the safety shoes and the heel of the foot should not be tight or loose.

5. The upper of the safety shoes should not squeeze the instep.

6. The waist nest of the safety shoes matches the arch of the foot, and the waist gang must hold the foot.

Second, what material is good for the soles of labour insurance shoes?
The common soles of labour insurance shoes are: rubber sole, PU sole, EVA sole, MD sole and so on.
1, rubber sole
The two most common soles in labour insurance shoes are rubber sole and PU (polyurethane) sole.

Rubber soles are made of natural rubber or synthetic rubber, which have high elasticity and flex resistance, and can withstand repeated bending, stretching, compression without being damaged. In addition, rubber soles are wear-resistant, non-slip, acid and alkali resistant, and are suitable for most operating environments.

2.PU (polyurethane) sole

PU sole, also called polyurethane sole, is one of the common soles for labour protection shoes. It is usually formed in the production process of various bubbles, lightweight and easy to form, PU sole is very flexible, and has the advantages of lightweight, abrasion-resistant, oil-resistant, etc., more comfortable to wear, lightweight, and not easy to open the bottom of the broken glue.

3.EVA sole

EVA is a kind of polymer material, the sole made of EVA is very light. In addition to light, EVA sole has high resilience and tension resistance, high toughness, good shock absorption and buffer performance, EVA sole mainly has pure EVA sole and EVA+rubber sole.

4.MD sole
MD bottom is MODEL or PHYLON Flying Dragon collectively, is the second high-pressure EVA moulding products.

MD soles are mostly used in the form of combinations, and the commonly used combinations are EVA+rubber; EVA soles are comfortable, lightweight, with good shock absorption and cushioning effects, and then matched with rubber soles at the bottom to provide good gripping and wear-resistant effects. Many running shoes and basketball shoes use this kind of sole.

Ningbo Staneex Imp. & Exp. Co. Ltd is a professional company specializing in the design and manufacture of a wide range of hi vis clothing,safety protective garments, safety shoes, hard hat,safety gloves and accessories.
Our factory comprises four workshops, covering a floor space of 30,000 square meters, with approximately 200 workers and a daily output of 15,000 vests. We have a robust production capacity and have been in business for over ten years.
Our products meet the European market EN ISO20471, EN1150, ANSI/ISEA for the US market, and AS/NZS standards for the Australian market. We also export our products to Asia, the Middle East, Africa, and other countries.